One-Spot Wonders: My Best Find from the Smallest Spot You know those moments where your gut says, “Just give it a quick swing” ? Well, this story is exactly that—and it taught me a lesson I won’t forget. The Setup It was a long day out at a rural permission I’d had my eye on for months—an old farmhouse with history stretching back to the early 1900s. Most of the yard had already been combed over. I’d pulled a few relics earlier in the day, a button or two, a rusted spoon, and plenty of old iron junk. The usual. After hours of detecting in the hot sun and feeling like I’d tapped the place dry, I called it quits and started packing up. But as I walked past the side of the house on my way back to the van, I noticed this little 6x6 foot patch of grass wedged between a crumbling concrete step and the base of a downspout. Honestly, it looked like nothing. Too tight to swing in, trampled flat, and filled with roots. But that itch hit me. The one that says, “Just swing the coil one...

  What’s Actually Happening Under Your Metal Detector? (And How to Find More Stuff) So you're out there swinging a metal detector like a treasure-hunting Jedi, but have you ever asked: What’s this thing really doing? Like, how does it know there's a rusty nail down there? Or a coin? Or your future retirement in gold bars? Let’s break it down—no science degree required. The Coil: Your Detector’s Superpower At the bottom of your detector is the coil—that big circle thing you wave around like you’re casting spells. But it’s not magic. It’s actually science. Here’s the basic deal: The coil sends out invisible magnetic energy into the ground. When this energy hits metal, it causes something called “eddy currents” in the object (fancy term for tiny electric swirls). Those eddy currents push back with their own magnetic vibes. Your detector senses that “pushback” and goes “BEEP!” That’s it. That’s the moment you start digging like a pirate who’s found a clue. Beep...

If you’ve been swinging the Minelab Equinox long enough, chances are your coil ears may eventually crack or break — and, let’s be honest, it usually happens after the warranty runs out . Don’t panic — this blog post walks you through how I repaired my 11" Equinox coil ears using Plastic Bonder JB Weld , a strong two-part epoxy. It’s a simple, inexpensive fix — and I’ve included photos for each step (which you’ll find below). What You’ll Need: Plastic Bonder JB Weld (2-part epoxy for plastic) Toothpick or small stick (for mixing and applying) Cardboard (for coil ear spacing and mixing) Rubbing alcohol (for cleaning) Paper towel or cloth Optional: painter’s tape or clamp Gloves (recommended) Step 1: Clean the Area Thoroughly Before doing any repairs, clean around the broken ear with rubbing alcohol to remove dirt, oils, and dust. Let it dry completely. Step 2: Mix the Plastic Bonder JB Weld Squeeze equal parts of the resin and hardener onto a piece of ca...

  WARNING!!! If you don't like crude photos don't read on!  "Dude… I Don’t Think This Is Treasure." Okay, so picture this: It’s a random Saturday, weather’s decent, and I’m out doing my thing with the metal detector in this small forest next to an old, sketchy-looking property. Like, the kind of place where you'd either find buried loot or an old toilet seat — no in between. Anyway, I’m scanning the ground, just minding my business. Birds are chirping, trees are swaying, and my detector starts going off like, BEEP-BEEP-BEEP , in that “OH MY!, something good is here” kind of way. I get hyped. Could be a coin. Maybe a ring. Maybe pirate gold. (A guy can dream, okay?) So I start digging. About six inches down… I see it. Something black. Kinda smooth. For a second I’m like, “Oh sick! Maybe it’s a bag of gold or one of those weird vintage Louis V bag or something.” Spoiler: It was not that. It was NOT that at all. Uhhh… What Is That? So I pull it out (bad choice of w...