If you’ve been swinging the Minelab Equinox long enough, chances are your coil ears may eventually crack or break — and, let’s be honest, it usually happens after the warranty runs out . Don’t panic — this blog post walks you through how I repaired my 11" Equinox coil ears using Plastic Bonder JB Weld , a strong two-part epoxy. It’s a simple, inexpensive fix — and I’ve included photos for each step (which you’ll find below). What You’ll Need: Plastic Bonder JB Weld (2-part epoxy for plastic) Toothpick or small stick (for mixing and applying) Cardboard (for coil ear spacing and mixing) Rubbing alcohol (for cleaning) Paper towel or cloth Optional: painter’s tape or clamp Gloves (recommended) Step 1: Clean the Area Thoroughly Before doing any repairs, clean around the broken ear with rubbing alcohol to remove dirt, oils, and dust. Let it dry completely. Step 2: Mix the Plastic Bonder JB Weld Squeeze equal parts of the resin and hardener onto a piece of ca...
Love metal detecting? So do I! This blog is all about tips, tricks, gear reviews, and the ridiculous things I dig up (both treasure and trash). Whether you're after how-to guides, detector reviews, or just some good laughs, you're in the right place. Expect serious advice, weird finds, and maybe a few rants about pull-tabs. Grab your detector—your hunt begins here!


